Key Switch Assembly with Choke - 88107A13 A 3ft (915mm) harness without audio warning horn. It has a 6-pin connector that adapts to harness 896537K. 3/4in cutout with housing. For:...
Key Switch Kit - 88107A5 Includes: Switch Two keys Crimp connectors to attach to wiring harness Features: Push to choke with key Fits: Select Quicksilver side mount control boxes and...
Key Switch w/ Harness - Non DTS 14 Pin -11ft - 896537K11 An 11ft harness (896537A11) with new 14-pin connector for the engine and additional connectors that allow easy quick...
Key Switch w/ Harness - Non DTS 14 Pin -15ft - 896537K15 A 15ft harness (896537A15) with new 14-pin connector for the engine and additional connectors that allow easy quick...
Key Switch w/ Harness - Non DTS 14 Pin -20ft - 896537K20 A 20ft harness (896537A20) with new 14-pin connector for the engine and additional connectors that allow easy quick...
Key Switch w/ Harness - Non DTS 14 Pin -25ft - 896537K24 A 25ft harness (896537A24) with new 14-pin connector for the engine and additional connectors that allow easy quick...
Key Switch w/ Harness - Non DTS 14 Pin -25ft - 896537K25 Two 25ft harnesses (896537A24) with new 14-pin connector for the dual engine applications and additional connectors that allow...
Key Switch w/ Harness - Non DTS 14 Pin -40ft - 896537K40 A 40ft harness (896537A40) with new 14-pin connector for the engine and additional connectors that allow easy quick...
Key Switch w/ Harness -25ft. - 816626A24 25ft (7.6m) harness with audio warning horn mounts in a 2-1/8in. (54mm) hole. Includes: Warning horn Electrical connections for power trim Instrumentation Lanyard...
Lanyard Assembly, 54 Inch - 8M0164890 / 8M0092849 Lanyard Cord with Plastic Clip, 54 inches in length. Can be used on any Mercury Marine/Quicksilver lanyard stop switch at the helm....
Lanyard Diode Kit - 898289A72 This kit is a dual engine adapter that is required when connecting one lanyard stop switch to two engines. Without this kit the engines would...
Lanyard Kill Switch Single Motor - 19674A08 5ft Harness & 2 inch Cutout with Black Bezel. Used when Mounting Controls with no Lanyard Switch Included. For: Outboards & DTS Engines...
Lanyard Stop Switch - Dual Flush Mount -5ft - 19674A12 Lanyard cord attaches to the toggle switch/cap and boat driver. When switch toggles or cap pulls off switch, the ignition...
Lanyard Stop Switch -5ft - 19674A05 Lanyard cord attaches to the toggle switch/cap and boat driver. When switch toggles or cap pulls off switch, the ignition is interrupted and the...
