Lanyard Stop Switch - Dual Flush Mount -5ft - 19674A12 Lanyard cord attaches to the toggle switch/cap and boat driver. When switch toggles or cap pulls off switch, the ignition...
Lanyard Diode Kit - 898289A72 This kit is a dual engine adapter that is required when connecting one lanyard stop switch to two engines. Without this kit the engines would...
Resistor Pack - DTS Shadow Mode - 898091T01 Resistor pack used with DTS shadow mode applications. #93 included with the harness for this versions Helm 1 and Starboard 2. Fits:...
Plug Assembly Diagnostic Port - 8M0046339 10-pin diagnostic port for use on any SmartCraft application. Used as a 10 pin diagnostic port for connecting Mercury Computer Diagnostic System (CDS) junction...
J-Box Y Harness - 8M0165555 This harness features a Y-shaped configuration with one male and two female connectors, facilitating the connection of multiple SmartCraft devices to a single junction box....
Tachometer Harness - 69108A5 4 pin style tachometer harness used with 84-87364Axx, 65640Axx, 76334Axx series remote controls and ignition/choke assemblies. Used with: 87364A series harnesses 65640A series controls 76334A series...
Remote Control Adapter Harness - 892473A01 Converts the traditional Mercury connector to an amp 8-pin connector. Converts side mount controls 881170A3, 15, 16, and the 816626A series ignition key switch...
Engine Oil Pressure Sender - 37293T
Replaces factory installed sender on engine. For use with dual station instrumentation.
Fits: MCM/MIE gasoline engines
Two Station Start/Stop Panel - 8M0078892 3ft harness connects in place of ignition switch, mounts in a 3-3/8in hole. Used on outboard installations that have mechanical Non DTS requirements for...
DTS Triple Engine Trim Pad - 879303A03 Low profile mount trim pad for triple engine applications. For: Gen 1 (2007 and newer) DTS Dual Engines Flush Mount Trim Switch Assembly...
Dual Auxiliary Dash Switch Harness - 866704T01 This harness allows the connection to a auxiliary trim switch. Mounts between the 8-pin trim connector and the command module harness. For: DTS...
Trim All Adapter Harness - 8M0094269 Harness allows for use of "trim all" switch on dual console ERC's when retrofitting with previous generation helm harnessing. Can also be used for...
Dual Engine Zero Effort 8 Pin Trim All Harness - 8M0047784 Harness that provides individual bullet drops for rocker switches from the 8 pin trim all connector on the newer...
Transom Mounted Power Tilt Panel - 815200A1 Rocker switch style with 6ft harness and bullet connectors. Provides tilt control from the outside of the boat when trailering and launching. "T"...
